TAD TL 1101H and ESg 1 Ribbon tweeter.

A custom made pair of monitor sized speakers to work with a subwoofer. A very fine example of Birds Eye Maple veneer with a heavy 3 dimensional quilt. The eye's even show a raison affect in this veneer. Bookmatched and mirrored to each other. The edges on the baffle are wrapped over from its face. The baffle on these speakers is made to be removable so it may be replaced with a different driver configuration if ever desired. Bolted to the cabinet with cap screws and T-nuts for durability.  To maintain flexibility, the dividing network for this speaker will be external. Trimmed in American Walnut around the baffle and on the binding post terminals.  Cardas pure copper binding post are used with Jena labs cryogenically treated hook up wire. Black grill cloth for a stealth appearance.  A group of quality components assembled to customer specifications.
Cabinets measure 21.5" tall, 13" wide, and 9" deep.

Custom cabinets as shown $5250.00 pair.

TAD TL 1101H and ESg1 Ribbon tweeter	Walnut trim around the removable baffle
Rear view with ports behind the tweeter	Cardas pure copper binding post and Cardas solder
O-Ring Gasket for removable baffle	Jena Labs Cryogenic hook up wire
French Walnut balamce veneer on baffle	The TAD drivers are bolted to the baffle from behind

 

 

www.woodhorn.com